Torque Specifications
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| ABM mounting screws to the HCU | 2 | - | 17 | |
| Brake Caliper Adapter to Knuckle Bolts - Front | 165 | 122 | - | |
| Brake Caliper Adapter to Knuckle Bolts - Rear | 91 | 67 | - | |
| Brake Caliper to Caliper Adaptor Bolts - Front | 27 | 20 | - | |
| Brake Caliper to Caliper Adaptor Bolts - Rear | 35 | 26 | - | |
| Brake Hose to Brake Caliper - Front | 17 | 13 | - | |
| Brake Hose to Brake Caliper - Rear | 17 | 13 | - | |
| Brake Pedal/Booster Nuts | 25 | 18 | - | * New Fastener: Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Brake Rotor to Hub Bolt - Front | 8 | - | 71 | |
| Brake Rotor to Hub Bolt - Rear | 7 | - | 61 | |
| Brake Tube to Brake Hose Nuts | 17 | 13 | - | |
| Brake Tube to ICU Nuts | 16 | 12 | - | |
| Brake Tube to Master Cylinder Nuts | 17 | 13 | - | |
| Dust Shield to Knuckle Bolts | 8 | - | 71 | |
| Electric Park Brake (EPB) Actuator to Caliper Bolts | 12 | 9 | - | |
| Electric Vacuum Pump to Cylinder Head Bolts | 23 | 17 | - | * New Fastener: Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| ICU to Bracket Nuts | 8 | - | 71 | |
| ICU Bracket to Body Bolt | 25 | 18 | - | |
| ICU Bracket to Body Nut | 25 | 18 | - | * New Fastener: Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Master Cylinder to Brake Booster Nuts | 17 | 13 | - | * New Fastener: Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Pedal Unit Nut | 22 | 16 | - | |
| Wheel Speed Sensor to Knuckle Bolt - Front | 7 | - | 61 | |
| Wheel Speed Sensor to Knuckle Bolt - Rear | 7 | - | 61 |