LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1289 (Tires & Wheels (Service Information)) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean wheel mounting surfaces of any corrosion or dirt.
  2. Position the tire and wheel assembly on the hub pilot as a guide.
  3. Install all five wheel mounting bolts, and tighten in a star pattern to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  4. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals