LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1301 (Front Suspension & Wheel Alignment) >> Front >> Stabilizer Bar, Front >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front crossmember. Refer to CROSSMEMBER, FRONT SUSPENSION, REMOVAL .
  2. Disconnect the stabilizer bar links from the stabilizer bar. Refer to LINK, STABILIZER BAR, REMOVAL  .
    GC0164505Courtesy of CHRYSLER GROUP, LLC
  3. Remove the front stabilizer bar bolts (2).
  4. Remove the stabilizer bar.
scientia non olet · About LEMON Manuals