Panel, Instrument: Removal
- Remove the steering column. Refer to COLUMN, REMOVAL .
- Remove the keyless ignition node. Refer to MODULE, KEYLESS IGNITION NODE (KIN), REMOVAL .
- Remove the instrument cluster. Refer to REMOVAL .
- Remove the bolts (1) from behind the cluster.
- From inside the vehicle, remove the bolt (1) that secures the instrument panel support beam to the support bracket of the cowl panel.
- Remove the fenceline bolt (1).
- Remove the left end cap (1).
- Remove the left cowl trim panel. Refer to PANEL, COWL TRIM, SIDE, REMOVAL .
- Remove the left A-pillar trim. Refer to PANEL, A-PILLAR TRIM, REMOVAL .
- Disconnect the left wire harness (1).
- Remove the left side retaining bolts (1).
- Remove the front floor console. Refer to CONSOLE, FLOOR, REMOVAL .
- Remove the radio. Refer to RADIO, REMOVAL .
- Remove the instrument panel storage bin. Refer to BIN, INSTRUMENT PANEL, REMOVAL .
- Remove the four nuts (1) that secure the HVAC housing to the center of the instrument panel support.
- Remove the two center support bolts (1).
- Remove the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL .
- Remove the right silencer panel (1).
- Remove the passenger side cowl trim panel. Refer to PANEL, COWL TRIM, SIDE, REMOVAL .
- Remove the right end cap (1).
- Remove the passenger side A-pillar trim. Refer to PANEL, A-PILLAR TRIM, REMOVAL .
- Remove the defroster ducts.
- Disconnect the right side wire harness (1 and 2).
- Remove the right side support fasteners (1).
- Remove the bolt to the right side HVAC.
- Remove the center duct.
- Disconnect the HVAC electrical connectors. Refer to HOUSING, HVAC, REMOVAL .
- Remove the instrument panel assembly.