LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (3.0L Turbo Diesel (Service Information)) >> Manifolds >> Manifold, Exhaust >> Removal >> Left Bank

Left Bank

WARNING: This page is about a different variant/trim than selected.
WARNING:

The normal operating temperature of the exhaust system is very high. Therefore, never work around or attempt to service any part of the exhaust system until it has cooled. Special care should be taken when working near the catalytic converter. The temperature of the converter rises to a high level after a short period of engine operation time.

  1. Remove the engine from the vehicle. Refer to REMOVAL .
    GC0146686Courtesy of CHRYSLER GROUP, LLC
  2. Remove the oil cooler adapter. Refer to ADAPTER, OIL COOLER, REMOVAL .
    GC0146647Courtesy of CHRYSLER GROUP, LLC
  3. Remove the bolts (1) and the left exhaust manifold heat shield (2).
    GC0146648Courtesy of CHRYSLER GROUP, LLC
  4. Remove the bolts (2) and the exhaust manifold pipe to turbocharger heat shield (1).
  5. Remove the turbocharger-to-cowl extension heat shield.
    GC0146650Courtesy of CHRYSLER GROUP, LLC
  6. Remove the three nuts (1) from the exhaust manifold pipe to turbocharger.
    GC0146649Courtesy of CHRYSLER GROUP, LLC
  7. Remove the nuts (1) and the left exhausts manifold (2).
  8. Remove and discard the gaskets.
scientia non olet · About LEMON Manuals