Front Outer Air Outlets
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Left Side
- Position the air outlet to the opening in the instrument panel and align the outlet to the instrument panel duct.
- Engage the retaining tabs that secure each air outlet to the instrument panel. Make sure the retaining tabs are fully engaged.
- Install and securely tighten the air outlet to instrument panel screw (2).
- Install the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, INSTALLATION .
Right Side
- Position the air outlet to the opening in the instrument panel and align the outlet to the instrument panel duct.
- Engage the retaining tabs that secure each air outlet to the instrument panel. Make sure the retaining tabs are fully engaged.
- Install and securely tighten the air outlet to instrument panel screw (1).
- Position and engage the retaining clips of the lower instrument panel (2) into the carrier frame. Make sure the retaining tabs are fully engaged.
- Install and securely tighten the three lower instrument panel screws and the two behind the end cap.
- Install the instrument panel end cap. Refer to CAP, INSTRUMENT PANEL END, INSTALLATION .
- Install the glovebox. Refer to GLOVE BOX, INSTRUMENT PANEL, INSTALLATION .