LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 509 (Suspension System) >> Rear >> Jounce Bumper >> Removal

Jounce Bumper: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the shock (Refer to SUSPENSION/REAR/SHOCK - REMOVAL) .
  2. Remove the coil spring (Refer to SUSPENSION/REAR/SPRING - REMOVAL) .
  3. Pull the jounce bumper downwards to remove. See Fig 1
Fig 1: Jounce Bumper
GC0025571Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals