LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine - V6 S/C 3.0L Petrol -- XE (X760)) >> Engine - V6 S/C 3.0L Petrol >> Specifications

Engine - V6 S/C 3.0L Petrol: Specifications

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE DATA

ENGINE DESCRIPTION ENGINE CAPACITY MAXIMUM ENGINE TORQUE (EEC) (SAE) MAXIMUM ENGINE POWER (EEC) (SAE) COMPRESSION RATIO BORE STROKE
  • 90° "Vee"
  • Cylinder
  • 24 Valves
 2.995
ccm		 450 Nm at 3.500 - 5.000 RPM 250 kW at 6.500 RPM 10.5 ± 0.50 84.5 ± 0.000 mm 89 ± 0.0 mm
ENGINE FIRING ORDER

FIRING ORDER
1:4:2:5:3:6
ENGINE VALVE CLEARANCE (COLD)

INTAKE VALVE (MM) EXHAUST VALVE (MM)
0.18 - 0.22 0.23 - 0.27
SPARK PLUGS

SPECIFICATION SPARK PLUG GAP
SILZKAR7C-10S 0.9 - 1.0 mm
LUBRICANTS, FLUIDS, SEALERS AND ADHESIVES

DESCRIPTION SPECIFICATION
Engine Oil - All markets excluding RoW, MENA, Brazil SAE 0W20 STJLR.51.5122
Engine Oil - RoW, MENA, Brazil SAE 0W20 STJLR.51.5122 or SAE 5W20 STJLR.03.5004
Sealant WSE-M4G323-A6
Core plug and stub pipe retainer WSK-M2G349-A7
Jaguar Premium Cooling System Fluid WSS-M97B44-D
NOTE: When servicing or draining the engine oil, the 0w20 oil is compatible with 5w20. Any residue mix is acceptable.
CAPACITIES (FOR RWD VEHICLES)

DESCRIPTION LITERS
Engine oil, initial fill 8.75
Engine oil, service fill with oil filter change 7.25
Engine oil, service fill without oil filter change 6.75
CAPACITIES (FOR AWD VEHICLES)

DESCRIPTION LITERS
Engine oil, initial fill 8.0
Engine oil, service fill with oil filter change 6.5
Engine oil, service fill without oil filter change 6.0
CYLINDER HEAD AND VALVE TRAIN

ITEM SPECIFICATION
Cylinder head maximum permitted warp (flatness specification) 0.2 mm (0.008 in)
Valve guide inner diameter (mm) 5.51 ± 0.01
Intake valve effective length (mm) (tip to gauge line) 117.58 ± 0.10
Exhaust valve effective length (mm) (tip to gauge line) 94.75 ± 0.10
Valve stem to guide clearance intake diametrical (mm) 0.042 - 0.057
Valve stem to guide clearance exhaust diametrical (mm) 0.03 - 0.065
Valve head diameter intake (mm) 31.6-Overall diameter-33 ± 0.10
Valve head diameter exhaust (mm) 26-Overall diameter-28 ± 0.10
Intake valve face angle (degrees) 44.875 ± 0.125
Exhaust valve face angle (degrees) 44° 52' 30" ± 7' 30"
Valve stem diameter intake (mm) 5.4705 ± 0.0075
Valve stem diameter exhaust (mm) 5.4525 ± 0.0075
Valve spring free length (mm) - inlet 46.1
Valve spring free length (mm) - exhaust 46.1
Valve spring installed height (mm) - inlet 36.78
Valve spring installed height (mm) - exhaust 37.07
Camshaft lobe lift intake (mm) 10
Camshaft lobe lift exhaust (mm) 9.36
Camshaft journal to cylinder head bearing surface clearance diametrical (mm) 0.025 - 0.065
Camshaft journal diameter - all positions 26.965 ± 0.01
Bearing diameter - all positions 27.01 ± 0.01
Camshaft journal maximum run out limit (mm)  
Camshaft journals to end journals 0.03
Camshaft journals to adjacent journals 0.015
Camshaft journal maximum out of round (mm) - all journals 0.005
Crankshaft end play (mm) 0.15 - 0.35
CRANKSHAFT PIN AND BEARING

CRANKSHAFT PIN DIAMETER BEARING SIZE (MM) CRANKSHAFT PIN LETTER
55.982 - 55.988 A - G
55.989 - 55.994 H - N
55.995 - 56.000 P - W
Crankshaft Pin Letter  Color 
A - G Brown/Yellow (Part Number - DX23-6211-BFA)
H - N Brown/Red (Part Number - DX23-6211-BEA)
P - W Brown/Blue (Part Number - DX23-6211-BDA)
NOTE: Make sure that the crankshaft pin journal classification number is noted correctly, so that the correct bearing is installed.
TORQUE SPECIFICATIONS

DESCRIPTION NM LB-FT LB-IN
Engine cover mounting bolts 10 7 88
Accessory drive belt tensioner retaining bolt 40 30 354
Supercharger belt idler/tensioner bracket retaining bolts 25 18 221
Secondary drive belt idler retaining bolts 40 30 354
Power steering pump pulley retaining bolts 25 18 221
Power steering pump retaining bolts 25 18 221
Power steering pump bracket to engine retaining bolts 25 18 221
Generator retaining bolts 48 35 425
Starter motor retaining bolts 48 35 425
Air conditioning compressor retaining bolts 25 18 221
Engine mounting to engine mounting bracket retaining nuts 48 35 425
Engine mounting to subframe retaining nuts 63 46 558
Engine mounting bracket to engine retaining bolts 48 35 425
Crankshaft damper pulley retaining LH threaded bolt 200 + 270° 148 + 270° 1770 + 270°
Flexplate retaining bolts 45 + 90° 33 + 90° 398 + 90°
Exhaust manifold heat shield retaining bolts (1),(2) - - -
Exhaust manifold retaining bolts (1),(2) - - -
Engine wiring harness bracket retaining bolts 10 7 88
Coolant outlet pipe 10 7 88
Intercooler retaining bolts 25 18 221
Intake manifold retaining bolts 25 18 221
Oil Cooler retaining bolts 13 10 115
Knock sensor (KS) retaining bolt 20 14 177
Ignition coil retaining bolts 8 - 71
Spark plugs 20 15 177
Fuel rail retaining bolts (1),(3) - - -
High pressure fuel pipe retaining bolts (1),(3) - - -
High pressure fuel pump retaining bolts 12 9 106
Oil filter housing assembly retaining bolts 12 9 106
Oil filter cap 28 21 248
Lifting eye bolts 25 + 90° 18 + 90° 221 + 90°
Manifold absolute pressure and temperature (MAPT) sensor sensor retaining bolts 5 - 44
Coolant pump retaining bolts 12 9 106
Variable valve timing (VVT) oil control solenoid retaining bolts 10 7 88
Camshaft position (CMP) sensor retaining bolts 10 7 88
Camshaft cover retaining bolts 13 10 115
Front upper timing cover retaining bolts 12 9 106
Front lower timing cover retaining bolts (1),(4) - - -
Engine rear cover retaining bolts (1),(5) - - -
VVT to camshaft retaining bolts 32 24 283
Camshaft bearing caps retaining bolts 11 8 97
Primary timing chain fixed guide retaining bolts 12 9 106
Primary timing chain tensioner retaining bolts 12 9 106
Primary timing chain tensioner guide blade retaining bolts 25 18 221
Auxiliary chain tensioner guide retaining bolts 21 15 186
Auxiliary chain fixed guide retaining bolt 12 9 106
Oil pump sprocket retaining bolt 25 18 221
Oil pump electrical connector retaining bolt 12 9 106
Cylinder head retaining bolts (1),(6) - - -
Engine oil level (EOL) sensor retaining bolt 12 9 106
Oil pan to oil sump body retaining bolts 12 9 106
Oil sump body to engine retaining bolts 25 18 221
Oil pan drain plug 24 17 212
Oil transfer tube to Oil pan body retaining bolts 11 8 97
Oil pump to engine block retaining bolts 25 18 221
Pick-up pipe to oil pump retaining bolts 12 9 106
Windage tray retaining bolts 25 18 221
Piston cooling jet retaining bolts 12 9 106
Engine block coolant draining plug 50 37 442
Balance shaft assembly retaining bolts 25 + 90° 18 + 90° 221 + 90°-
Rear balance weight assembly retaining nuts 25 + 38° 18 + 38° 221 + 38°
Rear balance weight assembly chain bracket retaining bolt 25 18 221
Connecting rod bolts 20 + 125° 14 + 125° 177 + 125°
Camshaft bearing caps:
STAGE 1 3 - 27
STAGE 2 12 - 106
Crankshaft pulley bolt:
STAGE 1 200 148 -
STAGE 2 200° - -
Rear Crankshaft cover retaining bolts 11 - 97
Exhaust sensor 45 - 33
Exhaust manifold heat cover retaining bolts 3   27
Oil filter 25 18 221
Fuel pump camshaft retaining bolts 12 - 106
Oil pump sprocket 12 - 106
Oil level sensor 12 - 106
Engine mount bracket to engine block 40 30 -
(1) Refer to procedure for correct torque sequence.
(2) Exhaust manifold, refer to EXHAUST MANIFOLDS , LEFT EXHAUST MANIFOLD  and RIGHT EXHAUST MANIFOLD .
(3) Fuel rail retaining bolts, refer to the applicable service information in FUEL CHARGING AND CONTROLS - V6 S/C 3.0 L PETROL .
(4) Front lower timing cover, refer to Installation .
(5) Engine rear oil seal plate, refer to Installation .
(6) Cylinder head retaining bolts, refer to Installation  (LH side), and Installation  (RH Side).
scientia non olet · About LEMON Manuals