LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Automatic Transmission/Transaxle - Vehicles With: 8HP45 8-Speed Automatic Transmission RWD -- XE (X760)) >> Automatic Transmission/Transaxle - Vehicles With: 8HP45 8-Speed Automatic Transmission RWD >> Input Shaft Seal >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION:
    • Install a new seal.
    • Care must be taken to avoid damage to the seal register and running surface.
    G11298531

    Special Tool(s):  JLR-308-845

  2. G11291832

    Special Tool(s):  307-613

  3. CAUTION: Make sure the torque converter is fully located into the oil pump drive.
    G11291833
  4. Refer to: Transmission - INGENIUM I4 2.0L Diesel - INSTALLATION  .

    Refer to: Transmission - V6 S/C 3.0L Petrol - INSTALLATION  .

scientia non olet · About LEMON Manuals