LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Symptom Diagnosis & Removal And Installation) (Except Hybrid) >> Removal And Installation >> Air Breather Hose >> VQ37VHR (AWD) >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove propeller shaft assembly (front). Refer to Exploded View .
  2. Remove clips of air breather hose from brackets.
  3. Remove air breather box from bracket.
  4. Remove air breather box from air breather hose.
  5. Remove air breather hose from breather tube.
  6. Remove propeller shaft assembly (rear). Refer to Exploded View .
  7. Remove control rod from A/T shift selector assembly. Refer to Exploded View .
  8. Support A/T assembly with a transmission jack.
    CAUTION: Be careful not to allow it to collide against the drain plug and overflow plug when setting the transmission jack.
  9. Remove rear engine mounting member with a power tool. Refer to Exploded View .
  10. Remove bolt fixing A/T assembly to engine assembly with power tool.
  11. Remove air bracket.
scientia non olet · About LEMON Manuals