Additional Service When Replacing Module: Description
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- If a malfunction, such as abnormal voltage, occurs in a Li-ion battery cell, replace the module including a malfunctioning cell.
Module layout
: Vehicle upper MD: Module - To replace module, select the minimum module voltage among normal modules as an adjustment voltage and adjust all 12 modules to the adjustment voltage.
- Only one module can be replaced with a new one. If any of the following conditions apply, replace all of the 12 modules with new ones.
- More than 17 months from the date of manufacture of Li-ion battery.NOTE:
For the date of manufacture of Li-ion battery, check its module serial number label. For the position of module serial number label, refer to INSPECTION .
- More than one module needs to be replaced with new ones.
- There is a single module replacement history.NOTE:
Single module replacement is possible if the same module needs to be replaced for the second and subsequent times.
- More than 17 months from the date of manufacture of Li-ion battery.
- Work procedures vary depending on the combination of parts. Refer to the table below to perform a work procedure.
: Replacement
Replacement parts Remarks Reference LBC One module All modules (12) * * - - LBC data must be moved
- Configuration must be performed
WORK PROCEDURE - - * LBC data must be erased WORK PROCEDURE * - * - Unnecessary to move/erase LBC data
- Configuration must be performed
WORK PROCEDURE - * - Unnecessary to move/erase LBC data WORK PROCEDURE