Diagnosis Procedure

Regarding Wiring Diagram information, refer to WIRING DIAGRAM - WITH AUTOMATIC DRIVE POSITIONER or WIRING DIAGRAM - WITHOUT AUTOMATIC DRIVE POSITIONER .

1. CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT
   
   
   1. Turn ignition switch OFF.
   2. Disconnect combination meter harness connector M23 and washer fluid level switch harness connector E208.
   3. Check continuity between combination meter harness connector M23 and washer fluid level switch harness connector E208.

      Combination meter		Washer fluid level switch		Continuity
      Connector	Terminal	Connector	Terminal
      M23	49	E208	1	Yes

   4. Check continuity between combination meter harness connector and ground.

      Combination meter		Ground	Continuity
      Connector	Terminal
      M23	49		No

   Is the inspection result normal?

   YES 

   GO TO STEP 2. 

   NO 

   Repair or replace harness or connectors.

2. CHECK WASHER FLUID LEVEL SWITCH GROUND CIRCUIT
   
   

   Check continuity between washer fluid level switch connector and ground.

   Washer fluid level switch		Ground	Continuity
   Connector	Terminal
   E208	2		Yes

   Is the inspection result normal?

   YES 

   Inspection End.

   NO 

   Repair or replace harness or connectors.