LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Re0F10J) (Diagnostic Trouble Codes (DTCS), Symptom Diagnosis And R & I) (Except Hybrid) >> DTC/Circuit Diagnosis >> Main Power Supply And Ground Circuit >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

  1. CHECK TCM POWER CIRCUIT (PART 1)

    1. Turn ignition switch OFF.
    2. Disconnect TCM connector.
    3. Check voltage between TCM harness connector terminals and ground.
      + - Voltage
      TCM
      Connector Terminal
      F89 45 Ground 10 - 16 V
      46

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    GO TO STEP   4  .

  2. CHECK TCM POWER CIRCUIT (PART 2)

    Check voltage between TCM harness connector terminals and ground.

    + - Condition Voltage
    TCM
    Connector Terminal
    F89 47 Ground Ignition switch ON 10 - 16 V
    Ignition switch OFF Approx. 0 V
    48 Ignition switch ON 10 - 16 V
    Ignition switch OFF Approx. 0 V

    Is the inspection result normal?

    YES 

    GO TO STEP 3  .

    NO 

    GO TO STEP   5  .

  3. CHECK TCM GROUND CIRCUIT

    Check continuity between TCM harness connector terminals and ground.

    TCM - Continuity
    Connector Terminal
    F89 41 Ground Existed
    42

    Is the inspection result normal?

    YES 

    Check intermittent incident. Refer to INTERMITTENT INCIDENT .

    NO 

    Repair or replace malfunctioning parts.

  4. DETECT MALFUNCTION ITEMS (PART 1)

    Check the following items:

    • Open or short circuit in harness between battery positive terminal and fuse block (J/B). Refer to WIRING DIAGRAM - BATTERY POWER SUPPLY - .
    • Open or short circuit in harness between fuse block (J/B) connector terminal 2N and TCM harness connector terminal 45, and 46.
    • 10A fuse [No. 25, located in the fuse block (J/B)]. Refer to TERMINAL ARRANGEMENT .

    Is the inspection result normal?

    YES 

    Check intermittent incident. Refer to INTERMITTENT INCIDENT .

    NO 

    Repair or replace malfunctioning parts.

  5. DETECT MALFUNCTIONING ITEMS (PART 2)

    Check the following items:

    Is the check result normal?

    YES 

    Check intermittent incident. Refer to INTERMITTENT INCIDENT .

    NO 

    Repair or replace malfunctioning parts.