LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> Q50 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Drive Mode System (INFINITI Intuition) (Except Hybrid) >> INFINITI Intuition >> System Description >> Component Parts >> Component Parts Location

Component Parts Location

Fig 1: Drive Mode System (Infiniti Intuition) Component Parts Location
GNSJSOIA0955ZZ-955Courtesy of NISSAN NORTH AMERICA, INC.
  Integral switch   Inside of dash side finisher LH    
No. Part Description
  Display control unit
  • Display control unit receives the following signal from integral switch.
    • Select signal
  • Display control unit transmits information of PERSONAL mode set by the driver to the chassis control module via the following signal.
    • Drive mode characteristics customizing signal
  • The display control unit transmits an user information signal to the following units:
    • Combination meter
    • A/C auto amp.
    • Driver seat control unit
    • ADAS control unit
    • Chassis control unit
  • The display control unit receives a key link signal and a log - in permit signal from chassis control module.
  • The display control unit receives a key ID signal from BCM.
  A/C auto amp.
  • The A/C auto amp. receives a key link signal and a log - in permit signal from chassis control module.
  • The A/C auto amp. receives a key ID signal from BCM.
  • The A/C auto amp. receives a user information signal from display control unit.
Refer to COMPONENT PARTS LOCATION for installation.
  NAVI control unit The NAVI control unit receives a user information signal from display control unit.
Refer to COMPONENT PARTS LOCATION for installation.
  AV control unit The AV control unit receives a user information signal from display control unit.
Refer to COMPONENT PARTS LOCATION for installation.
  Steering force control module
  • Steering force control module receives the following signal from chassis control module.
    • Drive mode signal
  • Steering force control module controls the steering effort and response according to the received signal.
Refer to COMPONENT PARTS LOCATION for installation.
  ECM
  • ECM receives the following signal from TCM.
    • Drive mode signal
  • ECM controls throttle angle characteristics and torque according to the received signal and transmits the following signals to ADAS control unit.
    • ECO pedal reaction force control signal
Refer to COMPONENT PARTS LOCATION for installation.
  BCM
  • The BCM transmits a key ID signal to the following units:
    • Combination meter
    • Display control unit
    • A/C auto amp.
    • Chassis control unit
    • Driver seat control unit
    • ADAS control unit

      Refer to COMPONENT PARTS LOCATION for installation.
  TCM
  • TCM receives the following signal from chassis control module.
    • Drive mode signal
  • TCM selects a shift pattern according to the received signal and transmits the following signal to ECM and the ADAS control unit.
    • Drive mode signal
Refer to COMPONENT PARTS LOCATION for installation.
  Accelerator pedal actuator
  • Accelerator pedal actuator receives the following signal from the ADAS control unit.
    • ECO pedal reaction force control signal
  • Accelerator pedal actuator exerts a feedback force on the accelerator pedal according to the received signal.
  ABS actuator and electric unit
  • ABS actuator and electric unit receives the following signals from chassis control module.
    • Active trace control function control signal
  • ABS actuator and electric unit controls the active trace control function according to the received signal.
Refer to COMPONENT PARTS LOCATION for installation.
  Driver seat control unit
  • The driver seat control unit receives a key link signal and a log - in permit signal from chassis control module.
  • The driver seat control unit receives a user information signal from display control unit.
  • The driver seat control unit receives a key ID signal from BCM.

    Refer to COMPONENT PARTS LOCATION for installation.
  Combination meter
  • Combination meter receives the following signals from chassis control module.
    • Drive mode signal
    • Key link signal
    • Log - in permit signal
  • Combination meter displays the status of drive mode selected by the driver on the information display according to the received signal.
  • The combination meter receives a key ID signal from BCM.
  • The combination meter receives a user information signal from display control unit.
Refer to COMPONENT PARTS LOCATION for installation.
  Drive mode select switch DRIVE MODE SELECT SWITCH 
  ADAS control unit
  • ADAS control unit receives the following signal from chassis control module.
    • Drive mode signal
    • Key link signal
    • Log - in permit signal
  • ADAS control unit controls accelerator reaction force of accelerator pedal actuator according to the received signal and transmits the following signals to accelerator pedal actuator.
    • ECO pedal reaction force control signal
  • The ADAS control unit receives a user information signal from display control unit.
  • The ADAS control unit receives a key ID signal from BCM.
Refer to COMPONENT PARTS LOCATION for installation.
  Integral switch (lower display)
  • Integral switch (lower display) allows the driver to set a PERSONAL mode arbitrarily.
  • Integral switch (lower display) outputs the following signal (set by a driver) to the display control unit.
    • Select signal
  Chassis control module
  • Chassis control module receives the following signals from drive mode select switch and display control unit.

    From drive mode select switch

    • Up/down signal

    From display control unit

    • Drive mode characteristics customizing signal
  • Chassis control module identifies the drive mode selected by the driver according to the received signal and transmits the following signal to related control modules.
    • Drive mode signal
  • The chassis control module transmits a key link signal and a log-in permit signal to the following units:
    • Combination meter
    • Display control unit
    • A/C auto amp.
    • Driver seat control unit
    • ADAS control unit
  • The chassis control module receives a key ID signal from BCM.
  • The chassis control module receives a user information signal from display control unit.
Refer to COMPONENT PARTS LOCATION for installation.
scientia non olet · About LEMON Manuals