Component Parts Location

Fig 1: Meter System Component Parts Location

Courtesy of NISSAN NORTH AMERICA, INC.

Engine assembly (around the oil filter)

No.	Component	Function
	Fuel level sensor unit (sub)	Transmits the fuel level sensor signal to the combination meter.
	Fuel level sensor unit (main)	Transmits the fuel level sensor signal to the combination meter.
	ECM	Transmits the each signal to the combination meter via CAN communication. Refer to SYSTEM DESCRIPTION . Refer to COMPONENT PARTS LOCATION for detailed installation location.
	BCM	Transmits the each signal to the combination meter via CAN communication. Refer to SYSTEM DESCRIPTION . Refer to COMPONENT PARTS LOCATION for detailed installation location.
	IPDM E/R	Transmits the oil pressure switch signal to the combination meter via CAN communication. Refer to SYSTEM DESCRIPTION . Refer to COMPONENT PARTS LOCATION for detailed installation location.
	TCM	Transmits the each signal to the combination meter via CAN communication. Refer to SYSTEM DESCRIPTION . Refer to COMPONENT PARTS LOCATION for detailed installation location.
	ABS actuator and electric unit (control unit)	Transmits the each signal to the combination meter via CAN communication. Refer to SYSTEM DESCRIPTION . Refer to COMPONENT PARTS LOCATION for detailed installation location.
	Seat belt buckle switch (driver side)	Transmits the seat belt buckle switch signal (driver side) to the combination meter.
	Display control unit	Transmits the each signal to the combination meter via CAN communication. Refer to SYSTEM DESCRIPTION . Refer to COMPONENT PARTS LOCATION for detailed installation location.
	Combination meter	Refer to COMBINATION METER .
	Meter control switch	Refer to METER CONTROL SWITCH .
	Parking brake switch	Transmits the parking brake switch signal to the combination meter.
	Steering switch	Refer to STEERING SWITCH .
	A/C auto amp.	Transmits the each signal to the combination meter via CAN communication. Refer to SYSTEM DESCRIPTION . Refer to COMPONENT PARTS LOCATION for detailed installation location.
	Integral switch	Transmits the meter setting request signal to the combination meter.
	Oil pressure switch	Transmits the oil pressure switch signal to the IPDM E/R.