Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.

Remove tire with power tool.
At first, remove the following parts as a set.
- Engine, transmission assembly, transfer and front final drive: refer to "AWD: REMOVAL AND INSTALLATION " (VQ37VHR), "UNIT REMOVAL AND INSTALLATION " (VK50VE).
- Drive shaft: refer to "EXPLODED VIEW ".
Remove the following parts.
- Steering knuckle and wheel hub and bearing assembly: refer to "EXPLODED VIEW ".
- Steering gear assembly and hydraulic line: refer to "EXPLODED VIEW ", "VQ37VHR: EXPLODED VIEW " (VQ37VHR), "VK50VE: EXPLODED VIEW " (VK50VE).
- Stabilizer bar and stabilizer connecting rod: refer to "EXPLODED VIEW ".
- Transverse link: refer to "EXPLODED VIEW ".
- Engine mount insulator.
  - VQ37VHR for 2WD: Refer to "2WD: EXPLODED VIEW ".
  - VQ37VHR for 4WD: Refer to "AWD: EXPLODED VIEW ".
  - VK50VE: Refer to "EXPLODED VIEW ".