LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical) >> Unit Removal And Installation >> Engine Assembly >> Removal and Installation >> Removal >> Engine Room RH

Engine Room RH

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect all clips and connectors of the engine room harness from engine side.
  2. Disconnect fuel feed hose and EVAP service port hose. Refer to "EXPLODED VIEW ".
    CAUTION: Fit plugs onto disconnected hoses to prevent fuel leakage.
  3. Remove reservoir tank of power steering oil pump and piping from vehicle, and temporarily secure them on engine. Refer to "VK50VE: EXPLODED VIEW ".
    CAUTION: When temporarily securing, keep the reservoir tank upright to avoid fluid leakage.
scientia non olet · About LEMON Manuals