LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G37 IPL, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 61 (Automatic Transmission -- G37 Coupe) >> Removal And Installation >> Fluid Cooler System >> AWD >> AWD : Removal and Installation >> Removal

AWD : Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove air cleaner case (LH). Refer to "EXPLODED VIEW ".
  2. Remove engine lower cover with a power tool. Refer to "EXPLODED VIEW ".
  3. Remove A/T fluid cooler hose A and A/T fluid cooler hose B.
  4. Remove front propeller shaft. Refer to "EXPLODED VIEW ".
  5. Remove front suspension member. Refer to "EXPLODED VIEW ".
  6. Remove A/T fluid cooler tubes from A/T assembly and engine assembly.
    CAUTION: Be careful not to bend A/T fluid cooler tubes.
  7. Plug up opening such as the A/T fluid cooler tube holes.
  8. Remove clips and brackets.
scientia non olet · About LEMON Manuals