LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC - Automatic >> Repair Instructions >> Inside Air Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the left windshield garnish molding. Refer to Windshield Side Garnish Molding Replacement .
  2. Remove the left sunshade. Refer to Sunshade Replacement .
  3. Gently pull down the headliner.
  4. Remove the inside air temperature sensor from the headliner.
    5. Fig 1: View Of Inside Air Temperature Sensor Electrical Connector
    GM675996Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connector from the inside air temperature sensor.
    6. Fig 2: Inside Air Temperature Sensor
    GM675994Courtesy of GENERAL MOTORS CORP.
  6. Remove the inside air temperature sensor from the headliner.
scientia non olet · About LEMON Manuals