LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC - Automatic >> Repair Instructions >> Inside Air Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Inside Air Temperature Sensor
    GM675994Courtesy of GENERAL MOTORS CORP.
  1. Install the inside air temperature sensor to the headliner.
    2. Fig 2: View Of Inside Air Temperature Sensor Electrical Connector
    GM675996Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector to the inside air temperature sensor.
  3. Install the left sunshade. Refer to Sunshade Replacement .
  4. Install the left windshield garnish molding. Refer to Windshield Side Garnish Molding Replacement .
scientia non olet · About LEMON Manuals