Instrument Panel Carrier Support Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Instrument Panel Carrier Support Assembly & Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel lower trim panel assembly. Refer to Instrument Panel Lower Trim Panel Replacement (Cadillac) .
1	Instrument Panel Carrier Support Assembly Bolt (Qty: 1) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Instrument Panel Carrier Support Assembly Bolts (Qty: 4) Tighten: 22 N.m (16 lb ft)
3	Instrument Panel Carrier Support Assembly. Refer to Instrument Panel Upper Trim Panel Replacement (Cadillac) or Instrument Panel Upper Trim Panel Replacement (Except Cadillac) .