LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Hinge Replacement - Floor Console Arm Rest

Hinge Replacement - Floor Console Arm Rest

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Floor Console Armrest Assembly & Components
GM1785759Courtesy of GENERAL MOTORS CORP.
Hinge Replacement - Floor Console Arm Rest

Callout Component Name
Preliminary Procedure: 
Remove the Console Assembly. Refer to Console Replacement - Front Floor (Cadillac)  or Console Replacement - Front Floor (Except Cadillac) .
1 Front Floor Console Armrest Inner Panel Screws (Qty: 8)
NOTE: Refer to Fastener Notice .

Tighten:  2 N.m (18 lb in)

2 Front Floor Console Armrest Inner Panel
3 Front Floor Console Armrest to Hinge Screws (Qty: 4)

Tighten:  2 N.m (18 lb in)

4 Front Floor Console Armrest Assembly
5 Front Floor Console Compartment Assembly
Refer to Front Floor Console Compartment Replacement (Except Cadillac) .
6 Front Floor Console Armrest Hinge to Console Retainer Screws (Qty: 4)

Tighten:  2 N.m (18 lb in)

7 Front Floor Console Armrest Hinge Assembly