LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Console Replacement - Front Floor (Except Cadillac)

Console Replacement - Front Floor (Except Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Floor Console Assembly
GM1693900Courtesy of GENERAL MOTORS CORP.
Console Replacement - Front Floor (Except Cadillac)

Callout Component Name

Preliminary Procedures

  1. Remove the 2 front seats. Refer to Front Seat Replacement - Bucket .
  2. Remove the right and left front floor console trim panels. Refer to Front Floor Console Side Trim Panel Replacement - Right (Cadillac)  or Front Floor Console Side Trim Panel Replacement - Right (Except Cadillac)  and Front Floor Console Side Trim Panel Replacement - Left (Cadillac)  or Front Floor Console Side Trim Panel Replacement - Left (Except Cadillac) .
  3. Remove the front floor console bezel. Refer to Floor Console Bezel Replacement (Cadillac)  or Floor Console Bezel Replacement (Except Cadillac) .
  4. Disconnect the electrical connectors to the console assembly.
1 Front Floor Console Assembly
Tip: 
  1. With the aid of an assistant, remove the console from the vehicle.
  2. When replacing the console assembly, transfer all the necessary components.