Rear Seat Buckle Side Belt Replacement (Split Bench)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Seat Belt Buckle & Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove rear bench seat. Refer to Rear Seat Replacement (Avalanche/Escalade EXT) , Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat) . Remove seat cushion. Refer to Rear Seat Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) , Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket) .
1	Rear Seat (Buckle Side) Belt Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 52 N.m (38 lb ft)
2	Rear Seat (Buckle Side) Belt Assembly TIP: Tilt 60 percent split forward to access 40 percent split assembly.
3	Rear Seat (Buckle Side) Belt Assembly Cover
4	Rear Seat (Buckle Side) Belt Assembly Cover Retainer (Qty: 2)