Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat)
| Callout | Component Name |
|---|---|
| 1 | Rear Seat Assembly Forward Nut (Qty: 4)
CAUTION:
Refer to Fastener Caution . Procedure Fold the seat forward and remove the floor cover to access the nuts. Tighten 45 N.m (33 lb ft) |
| 2 | Rear Seat Assembly Rearward Nut (Qty: 4) Tighten 45 N.m (33 lb ft) |
| 3 | Rear Seat Assembly Procedure Disconnect the electrical connector, if equipped. |