LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 341 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Replacement (2500)

Stabilizer Shaft Replacement (2500)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Stabilizer Shaft (2500, 3500)
GM1869360Courtesy of GENERAL MOTORS CORP.
Stabilizer Shaft Replacement (2500)

Callout Component Name

Preliminary Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .
  3. Remove the stabilizer shaft link. Refer to Stabilizer Shaft Link Replacement (1500) , Stabilizer Shaft Link Replacement (2500) .
  4. Remove the stabilizer shaft insulator. Refer to Stabilizer Shaft Insulator Replacement (1500) , Stabilizer Shaft Insulator Replacement (2500) .
1 Stabilizer Shaft