Rear Seat Buckle Side Belt Replacement (Split Bench)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Seat Buckle Side Belt (Split Bench)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove rear bench seat. Refer to Rear Seat Replacement (Avalanche/Escalade EXT) , Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat) . Remove seat cushion. Refer to Rear Seat Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) , Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket) .
1	Rear Seat (Buckle Side) Belt Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 52 N.m (38 lb ft)
2	Rear Seat (Buckle Side) Belt Assembly TIP: Tilt 60 percent split forward to access 40 percent split assembly.
3	Rear Seat (Buckle Side) Belt Assembly Cover
4	Rear Seat (Buckle Side) Belt Assembly Cover Retainer (Qty: 2)