Rear Seat Back Cushion Frame Replacement (Tahoe/Yukon/Escalade with Split Bench)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Seat Back Cushion Frame (Tahoe/Yukon/Escalade with Split Bench)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Seat Replacement (Avalanche/Escalade EXT) , Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat) .
1	Rear Seat Head Restraint Depress the button on the inboard head restraint guide to raise the head restraint to the full up position. Insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.
2	Rear Seat Head Restraint Guides TIP: Squeeze the bottom of the head restraint guide together and push up to remove.
3	Rear Center Seat Belt Retractor Assembly Refer to Rear Seat Center Retractor Side Belt Replacement (Split Bench) .
4	Rear Seat Armrest Refer to Rear Seat Armrest Replacement (Avalanche/Escalade EXT) , Rear Seat Armrest Replacement (Tahoe/Yukon/Escalade with Bucket) , Rear Seat Armrest Replacement (Tahoe/Yukon/Escalade with Split Bench) .
5	Rear Seat Back Cushion Cover and Pad Refer to Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket) , Rear Seat Back Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) .
6	Rear Seat Back Recliner Bolts (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
7	Rear Seat Back Cushion Frame