Rear Seat Center Retractor Side Belt Replacement (Split Bench)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Seat Center Retractor Side Belt (Split Bench)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove rear bench seat. Refer to Rear Seat Replacement (Avalanche/Escalade EXT) , Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat) . Remove seat back pad and cover. Refer to Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket) , Rear Seat Back Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) .
1	Rear Seat Center Belt Assembly Cover TIP: Tilt 40 percent split forward for access.
2	Rear Seat Center Belt Retainer
3	Rear Seat Center Belt Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 52 N.m (38 lb ft)
4	Rear Seat Center Belt Assembly