Section 273 (Engine Mechanical - 4.8L, 5.3L, 6.0L Or 6.2L (5 Of 5))
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Off-Vehicle Repair Instructions (3 Of 3)
- Crankshaft Front Oil Seal Installation (RPO LY2/LC9/LY5/LMG)
- Crankshaft Front Oil Seal Installation (RPO LY6/L76/L92)
- Oil Pan Installation
- Oil Filter Installation
- Valve Lifter Installation (RPO LY2/LY6/L92)
- Valve Lifter Installation (RPO LC9/LY5/LMG/L76)
- Cylinder Head Installation - Left Side
- Cylinder Head Installation - Right Side
- Valve Rocker Arm and Push Rod Installation (RPO LY2/LC9/LY5/LMG)
- Valve Rocker Arm and Push Rod Installation (RPO LY6/L76/L92)
- Valve Rocker Arm Cover Installation - Left Side
- Valve Rocker Arm Cover Installation - Right Side
- Engine Block Valley Cover Installation
- Valve Lifter Oil Filter Installation
- Valve Lifter Oil Manifold Installation
- Engine Coolant Air Bleed Pipe and Hole Cover Installation (RPO LY2/LY6/L92)
- Engine Coolant Air Bleed Pipe and Hole Cover Installation (RPO LC9/LY5/LMG/L76)
- Intake Manifold Installation (RPO LY2/LY6/L92)
- Intake Manifold Installation (RPO LC9/LY5/LMG/L76)
- Fuel Rail and Injectors Installation
- Throttle Body Installation
- Water Pump Installation (RPO LY2/LC9/LY5/LMG)
- Water Pump Installation (RPO LY6/L76/L92)
- Exhaust Manifold Installation - Left Side
- Exhaust Manifold Installation - Right Side
- Oil Level Indicator and Tube Installation
- Automatic Transmission Flex Plate Installation
- Crankshaft Balancer Installation
- Engine Prelubing