Section 271 (Engine Mechanical - 4.8L, 5.3L, 6.0L Or 6.2L (4 Of 5))
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Off-Vehicle Repair Instructions (2 Of 3)
- Crankshaft Balancer Cleaning and Inspection
- Automatic Transmission Flex Plate Cleaning and Inspection
- Piston and Connecting Rod Disassemble
- Piston, Connecting Rod, and Bearing Cleaning and Inspection
- Piston and Connecting Rod Assemble
- Camshaft Bearing Removal
- Camshaft and Bearings Cleaning and Inspection (RPO LY2/LC9/LY5/LMG)
- Camshaft and Bearings Cleaning and Inspection (RPO LY6/L76/L92)
- Camshaft Bearing Installation
- Camshaft Timing Chain and Sprocket Cleaning and Inspection
- Camshaft Position Actuator Cleaning and Inspection
- Camshaft Position Actuator Magnet Cleaning and Inspection
- Camshaft Position Actuator Solenoid Valve Inspection (On-Vehicle)
- Camshaft Position Actuator Solenoid Valve Inspection (Off-Vehicle)
- Valve Rocker Arm and Push Rod Cleaning and Inspection
- Valve Lifter and Guide Cleaning and Inspection (RPO LY2/LY6/L92)
- Valve Lifter and Guide Cleaning and Inspection (RPO LC9/LY5/LMG/L76)
- Cylinder Head Disassemble
- Cylinder Head Cleaning and Inspection
- Valve Guide Reaming, and Valve and Seat Grinding
- Cylinder Head Assemble
- Oil Pump Disassemble
- Oil Pump Cleaning and Inspection
- Oil Pump Assemble
- Engine Front Cover Cleaning and Inspection (RPO LY2/LC9/LY5/LMG)
- Engine Front Cover Cleaning and Inspection (RPO LY6/L76/L92)
- Crankshaft Rear Oil Seal Housing Cleaning and Inspection
- Engine Block Valley Cover Cleaning and Inspection
- Valve Lifter Oil Manifold Cleaning and Inspection
- Valve Rocker Arm Cover Cleaning and Inspection
- Oil Pan Cleaning and Inspection
- Intake Manifold Cleaning and Inspection
- Exhaust Manifold Cleaning and Inspection
- Engine Coolant Air Bleed Pipe and Hole Cover Cleaning and Inspection
- Water Pump Cleaning and Inspection
- Thread Repair
- Service Prior to Assembly
- Engine Block Plug Installation
- Crankshaft and Bearing Installation
- Piston, Connecting Rod, and Bearing Installation
- Camshaft Installation
- Camshaft Position Actuator and Solenoid Valve Installation
- Timing Chain and Sprocket Installation
- Oil Pump, Screen and Crankshaft Oil Deflector Installation (RPO LY2/LC9/LY5/LMG)
- Oil Pump, Screen and Crankshaft Oil Deflector Installation (RPO LY6/L76/L92)
- Crankshaft Rear Oil Seal Housing Installation (Without Seal in Housing)
- Crankshaft Rear Oil Seal Housing Installation (With Seal in Housing)
- Crankshaft Rear Oil Seal Installation
- Engine Front Cover Installation (RPO LY2/LC9/LY5/LMG)
- Engine Front Cover Installation (RPO LY6/L76/L92)