LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Replacement (2500)

Stabilizer Shaft Replacement (2500)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Stabilizer Shaft (2500, 3500)
GM1869360Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .
  3. Remove the stabilizer shaft link. Refer to Stabilizer Shaft Link Replacement (2500)  or Stabilizer Shaft Link Replacement (1500) .
  4. Remove the stabilizer shaft insulator. Refer to Stabilizer Shaft Insulator Replacement (1500)  or Stabilizer Shaft Insulator Replacement (2500) .
1 Stabilizer Shaft
scientia non olet · About LEMON Manuals