LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement (1500)

Stabilizer Shaft Link Replacement (1500)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Stabilizer Shaft Link (1500)
GM1865546Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
1 Stabilizer Shaft Link Nut
NOTE: Refer to Fastener Notice .

Procedure

  1. Remove all traces of the original adhesive patch.
  2. Apply Threadlocker GM P/N 12345382 (Canadian P/N 10953489) BLUE LOCTITE # 242 on the threads of the bolts.

Tighten:  23 N.m (17 lb ft)
2 Stabilizer Shaft Link Bolt
3 Stabilizer Shaft Link Washer (Qty: 2)
4 Stabilizer Shaft Link Insulator (Qty: 4)
5 Stabilizer Shaft Link Spacer
scientia non olet · About LEMON Manuals