Seat Belt Retractor Replacement - No. 2 Rear

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Belt Retractor & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove third row seat. Refer to Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) or Rear Number 2 Seat Replacement (Suburban/Yukon XL) . Remove third row seat hinge finish cover. Refer to Rear Seat Number 2 Hinge Finish Cover Replacement . Remove third row seat back pad and cover. Refer to Rear Seat Number 2 Back Cushion Cover and Pad Replacement .
1	Rear Seat No. 2 Belt Bolt NOTE: Refer to Fastener Notice . Tighten: 52 N.m (38 lb ft)
2	Rear Seat No. 2 Belt Bracket Screw (Qty: 2) Tighten: 2 N.m (18 in)
3	Rear Seat No. 2 Belt Bracket Assembly
4	Rear Seat No. 2 Belt Bolt Tighten: 52 N.m (38 lb ft)
5	Rear Seat No. 2 Belt Assembly