Rear Seat Number 2 Hinge Finish Cover Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the Rear Seat No. 2 Back Cushion Cover. Refer to Rear Seat Number 2 Back Cushion Cover and Pad Replacement . |
|
| 1 | Rear Seat Hinge Finish Cover Screw (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 2 N.m (18 lb in) |
| 2 | Rear Seat Hinge Finish Cover Tip: Slide the belt out through the slit in the back of the bezel. |