Rear Seat Number 2 Back Cushion Latch Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Number 2 Back Cushion Latch & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) or Rear Number 2 Seat Replacement (Suburban/Yukon XL) . Remove the rear seat number 2 back cushion cover and pad. Refer to Rear Seat Number 2 Back Cushion Cover and Pad Replacement . Remove the rear seat number 2 cushion cover and pad. Refer to Rear Seat Number 2 Cushion Cover and Pad Replacement .
1	Rear Seat No. 2 Back Bolt NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Rear Seat No. 2 Back Bolt (Qty: 2) Tighten: 9 N.m (80 lb in)
3	Rear Seat No. 2 Cushion Bolt (Qty: 2) Tighten: 52 N.m (38 lb ft)
4	Rear Seat No. 2 Back Frame
5	Rear Seat No. 2 Back Cushion Latch Procedure Note the location of the cables for installation purposes. Remove the cables from the latch.