Rear Seat Number 2 Cushion Cover and Pad Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat No. 2 Cushion Pad & Cover

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) or Rear Number 2 Seat Replacement (Suburban/Yukon XL) . Remove the rear seat cushion finish covers. Refer to Rear Seat Number 2 Cushion Panel Replacement (AS3) or Rear Seat Number 2 Cushion Panel Replacement (AW2) .
1	Rear Seat No. 2 Cushion Cover Tip: Disconnect the j-channel from the seat cushion frame and remove the cushion cover and pad as an assembly.
2	Rear Seat No. 2 Cushion Pad Tip: Pull the seat cushion cover off the pad to disengage the retainers.

Callout

Component Name

Preliminary Procedure

Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) or Rear Number 2 Seat Replacement (Suburban/Yukon XL) .
Remove the rear seat cushion finish covers. Refer to Rear Seat Number 2 Cushion Panel Replacement (AS3) or Rear Seat Number 2 Cushion Panel Replacement (AW2) .

Rear Seat No. 2 Cushion Cover
Tip: Disconnect the j-channel from the seat cushion frame and remove the cushion cover and pad as an assembly.

Rear Seat No. 2 Cushion Pad
Tip: Pull the seat cushion cover off the pad to disengage the retainers.