LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Cargo Box Bridge Side Outer Panel Replacement

Cargo Box Bridge Side Outer Panel Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Cargo Box Bridge Side Outer Panel Assembly
GM1711726Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement .
  2. Remove cargo box bridge center panel. Refer to Cargo Box Bridge Cross Bar Replacement (Escalade EXT)  or Cargo Box Bridge Cross Bar Replacement (Avalanche) .
  3. Remove cargo box bridge side inner panel. Refer to Cargo Box Bridge Side Inner Panel Replacement (Escalade EXT)  or Cargo Box Bridge Side Inner Panel Replacement (Avalanche) .
1 Cargo Box Bridge Side Outer Panel Assembly
Tip:  Pull up on panel in order to release fasteners.
scientia non olet · About LEMON Manuals