Cargo Box Bridge Side Inner Panel Replacement (Avalanche)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Cargo Box Bridge Side Inner Panel Assembly & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement . Remove cargo box bridge center panel. Refer to Cargo Box Bridge Cross Bar Replacement (Escalade EXT) or Cargo Box Bridge Cross Bar Replacement (Avalanche) .
1	Cargo Box Bridge Side Inner Panel Screw (Qty: 4) Tip: Use a flat-bladed tool to release retainers.
2	Cargo Box Bridge Side Inner Panel Assembly

Callout

Component Name

Preliminary Procedures

Remove rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement .
Remove cargo box bridge center panel. Refer to Cargo Box Bridge Cross Bar Replacement (Escalade EXT) or Cargo Box Bridge Cross Bar Replacement (Avalanche) .

Cargo Box Bridge Side Inner Panel Screw (Qty: 4)
Tip: Use a flat-bladed tool to release retainers.

Cargo Box Bridge Side Inner Panel Assembly