Wipers Always On
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Wipers Always On
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Wiper/Washer Schematics Connector End View Reference: Wiper/Washer Connector End Views DEFINITION: Windshield wipers are always ON. |
|||
| 1 | Did you perform the Wiper/Washer System Description and Operation and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Wiper/Washer Systems |
| 2 |
|
Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections |
| 3 |
|
Go to Step 4 | Go to Step 6 |
| 4 |
|
Go to Step 10 | Go to Step 5 |
| 5 | Test the windshield wiper switch signal circuit for a short to ground. Refer to Circuit Testing
and Wiring Repairs
. Did you find and correct the condition? |
Go to Step 10 | Go to Step 8 |
| 6 | Inspect for poor connections at the windshield wiper/washer switch. Refer to Testing for Intermittent Conditions and Poor Connections
and Connector Repairs
. Did you find and correct the condition? |
Go to Step 10 | Go to Step 7 |
| 7 | Replace the windshield wiper/washer switch. Refer to Turn Signal Multifunction Switch Replacement
. Is the repair complete? |
Go to Step 10 | - |
| 8 | Inspect for poor connections at the windshield wiper motor. Refer to Testing for Intermittent Conditions and Poor Connections
and Connector Repairs
. Did you find and correct the condition? |
Go to Step 10 | Go to Step 9 |
| 9 | Replace the windshield wiper motor cover. Refer to Wiper Motor Cover Replacement - Front . Is the repair complete? |
Go to Step 10 | - |
| 10 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 3 |