LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Front Floor Console Replacement (without RPO SLT)

Front Floor Console Replacement (without RPO SLT)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Floor Console (without RPO SLT)
GM1831575Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the front seats. Refer to Front Seat Replacement - Bucket .
  2. Remove the front floor console bezel. Refer to Floor Console Bezel Replacement .
  3. Disconnect the electrical connectors to the console assembly.
1 Front Floor Console Assembly
Tip: 
  1. With the aid of an assistant, remove the console from the vehicle.
  2. When replacing the console assembly, transfer all the necessary components.