Floor Console Bezel Replacement

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Floor Console Bezel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Front Floor Console Bezel Assembly Tip: Use a flat-bladed plastic trim tool to release the retainer clips along the rear edge of the bezel. Lift the bezel out of the console assembly. If replacing the front floor console bezel assembly, transfer all necessary components.
2	Retainer Clip (Qty: 4)