DTC U012D (Battery Condition Monitor Module)
WARNING: This page is about a different variant/trim than selected.
DTC U012D : F-CAN Malfunction (Battery Condition Monitor Module - Generator Motor Control Module)
NOTE:
- Before you troubleshoot, review the general troubleshooting information .
- If any of the DTCs listed below are indicated at the same time as DTC U012D, troubleshoot those DTCs first, then recheck for U012D.
-
- -
U12A5
- -
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| U012D F-CAN Malfunction (Battery Condition Monitor Module - Generator Motor Control Module) |
DTC (Electric Powertrain)
- DTC check
-1. Turn the vehicle to the ON mode.
-2. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame U12A5 EP-CAN Malfunction (Battery Condition Monitor Module - Generator Motor Control Module) DTC (Electric Powertrain)
Is DTC U12A5 indicated at the same time?
YES
Go to the DTC U12A5 troubleshooting .
NO
Update the battery condition monitor module if it does not have the latest software .