Audio disc does not eject
NOTE:
- Check the vehicle battery condition first (see 12 VOLT BATTERY TEST ).
- Check the connectors for poor connections or loose terminals.
- Disc labels should not be used in the audio-navigation unit or the audio unit. They may damage and jam the player mechanism.
- Turn the ignition switch to ON (II).
- Turn on the audio-navigation unit or the audio unit.
Does the system turn on?
YES -Go to step 3.
NO -
- With navigation: Go to AUDIO-NAVIGATION UNIT POWER SWITCH WILL NOT TURN ON .
- Without navigation: Go to AUDIO UNIT POWER SWITCH WILL NOT TURN ON .
- Check to see if the disc ejects correctly with no binding by pressing the EJECT button.
Does the disc eject normally?
YES -Operation is normal.
NO -
- With navigation: Substitute a known-good audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the original audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ).
- Without navigation: Substitute a known-good audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the original audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ).
Special Tools Required
Diagnostic CD 07AAZ-SDBA100