LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Cooling System Specifications And Drive Belt Routing) >> Drive Belt Routing & Adjustment >> Accord, Civic, Cr-V & Prelude >> Deflection Inspection Method

Deflection Inspection Method

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2000 Honda Odyssey, 2000 Honda Insight, 2000 Honda Civic, 2000 Honda Accord, and 1999 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply a force of 22 ft. lbs. (98 N), and measure the deflection at the midpoint between the alternator and crankshaft pulley. If the belt is worn or damaged, replace it. If the belt needs adjustment, see Adjustment .
  2. Adjust belt to specifications. See BELT ADJUSTMENT SPECIFICATIONS .
Fig 1: Drive Belt Routing & Inspecting A/C Belt Tension (Deflection Method)
G00565880Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals