LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Cooling System Specifications And Drive Belt Routing) >> Specifications >> Belt Adjustment

Belt Adjustment

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2000 Honda Odyssey, 2000 Honda Insight, 2000 Honda Civic, 2000 Honda Accord, and 1999 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
BELT ADJUSTMENT SPECIFICATIONS

Application (1) Deflection - In. (mm)
Generator
Accord
4-Cylinder
New Belt (With A/C) (2) 0.16-0.24 (4.0-6.0)
Used Belt (With A/C) (3) 0.28-0.35 (7.0-9.0)
New Belt (Without A/C) (2) 0.31-0.39 (8.0-10.0)
Used Belt (Without A/C) (3) 0.41-0.49 (10.5-12.5)
V6 (4)
Civic
New Belt (2) 0.24-0.33 (6.0-8.5)
Used Belt (3) 0.31-0.41 (8.0-10.5)
CR-V
New Belt (2) 0.22-0.31 (5.5-8.0)
Used Belt (3) 0.33-0.45 (8.5-11.5)
Odyssey (4)(5)
New Belt (2) 0.18-0.26 (4.5-6.5)
Used Belt (3) 0.31-0.41 (8.0-10.5)
Prelude
New Belt (2) 0.22-0.30 (5.5-7.5)
Used Belt (3) 0.37-0.49 (9.5-12.5)
S2000 (4)(5)
A/C Compressor
Accord
4-Cylinder (5)
V6 (4)(5)
Civic
New Belt (2) 0.20-0.26 (5.0-6.5)
Used Belt (3) 0.30-0.37 (7.5-9.5)
CR-V
New Belt (2) 0.20-0.28 (5.0-7.0)
Used Belt (3) 0.30-0.41 (7.5-10.5)
Insight
New Belt (2) 0.16-0.24 (4.0-6.0)
Used Belt (3) 0.30-0.41 (7.5-10.5)
Odyssey (4)(5)
Prelude (5)
S2000 (4)(5)
Power Steering
Accord
4-Cylinder
New Belt (2) 0.43-0.49 (11.0-12.5)
Used Belt (3) 0.51-0.63 (13.0-16.0)
V6
New Belt (2) 0.41-0.49 (10.5-12.5)
Used Belt (3) 0.57-0.67 (14.5-17.0)
Civic
B16A2 Engine
New Belt (2) 0.20-0.28 (5.0-7.0)
Used Belt (3) 0.30-0.43 (7.5-11.0)
All Other Engines
New Belt (2) 0.30-0.39 (7.5-10.0)
Used Belt (3) 0.41-0.55 (10.5-14.0)
CR-V
New Belt (2) 0.30-0.39 (7.5-10.0)
Used Belt (3) 0.43-0.57 (11.0-14.5)
Odyssey
New Belt (2) 0.33-0.43 (8.5-11.0)
Used Belt (3) 0.51-0.65 (13.0-16.5)
Prelude
New Belt (2) 0.33-0.43 (8.5-11.0)
Used Belt (3) 0.51-0.65 (13.0-16.5)
Water Pump Belt
Insight
New Belt (2) 0.28-0.39 (7.0-10.0)
Used Belt (3) 0.33-0.43 (8.5-11.0)
(1) With 22 lbs. (10 kg) pressure applied midway on longest belt run except for Accord 4-cylinder, where deflection is measured between generator and A/C compressor.
(2) Install new belt to new specification. Run for 5 minutes and readjust to used belt specification.
(3) Specification is for a used belt. Belt is considered used when it has been run for 5 minutes or more.
(4) Automatic belt tensioner is used to maintain proper drive belt adjustment.
(5) Generator and A/C compressor use a common drive belt.
scientia non olet · About LEMON Manuals