Installation Procedure

Accelerator Pedal with Position Sensor Assembly (1) - Install - Accelerator Pedal with Position Sensor Assembly Replacement
Brake Pedal Retainer (1) - Install NEW

NOTE:

Align the power brake booster pushrod with the brake pedal retainer.

Brake Pedal Assembly - Install
Position the brake and accelerator pedal assembly and secure the wire harness retainer.
CAUTION:
Fastener Caution

Brake Pedal Bracket Bolt (1) - Install and tighten 15 N.m (11 lb ft) (Qty: 2)
Brake Pedal Bracket Bolt (1) - Install and tighten 15 N.m (11 lb ft)
Brake Pedal Retainer (1) - Install
Brake Pedal (2) - Secure
Accelerator Pedal with Position Sensor Assembly Electrical Connector - Connect
Brake Pedal Position Sensor - Install - Brake Pedal Position Sensor Replacement
Front Floor Console Extension Panel - Left Side - Install - Front Floor Console Extension Panel Replacement - Left Side
Instrument Panel Lower Airbag - Driver Side - Install - Instrument Panel Lower Airbag Replacement - Driver Side
Power Brake Booster Bolt (1) - Install and tighten 22 N.m (16 lb ft) (Qty: 2)
Reposition and install the radiator surge tank. Radiator Surge Tank Replacement (LGX with V08)Radiator Surge Tank Replacement (LCV)