LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 311 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Front Seat Cushion Cover and Pad Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Seat Cushion Cover, Heater and Pad
    GM4353295Courtesy of GENERAL MOTORS COMPANY
  1. Install Front Seat Cushion Pad (3)
  2. Install Front Seat Cushion Heater (2). Refer to Front Seat Cushion Heater Replacement
  3. Install Front Seat Cushion Cover (1)
  4. Connect the J-channel retainers.
    5. Fig 2: Driver Seat Inner Recliner Finish Cover
    GM4286422Courtesy of GENERAL MOTORS COMPANY
  5. Install Driver or Passenger Seat Inner Recliner Finish Cover (2). Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement 
    6. Fig 3: Front Seat Cushion Outer Finish Cover
    GM4353303Courtesy of GENERAL MOTORS COMPANY
  6. Install Front Seat Cushion Outer Finish Cover (2). Refer to Front Seat Cushion Outer Finish Cover Replacement (Manual) Front Seat Cushion Outer Finish Cover Replacement (Power) 
    7. Fig 4: Driver Seat
    GM4282881Courtesy of GENERAL MOTORS COMPANY
  7. Install Driver or Passenger Seat (3). Refer to Driver or Passenger Seat Removal and Installation 
  8. Enable the SIR System. Refer to SIR Disabling and Enabling
  9. If servicing the passenger seat, re-zero the passenger presence system. Refer to Passenger Presence System Rezeroing
scientia non olet · About LEMON Manuals