Removal Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear side door trim. Refer to Rear Side Door Trim Replacement .
- Remove the rear side door armrest plate bolts and plate from the inner door panel.
- Remove the water deflector.
- Position the rear side door window to access and remove the door latch and handle bracket.
- Remove the rear side door locking rod. Refer to Rear Side Door Locking Rod Replacement .
- Disconnect the electrical connector from the rear side door outside handle bracket for the luminous reflecting light, if equipped.
- Disconnect the rear side door latch electrical connector.
- Remove the rear side door outside handle. Refer to Rear Side Door Outside Handle Replacement .
- Remove the rear side door outside handle bracket screw. Refer to Rear Side Door Outside Handle Bracket Replacement .
- Remove the four bolts (1) from the rear side door latch.
- Remove the outside handle bracket (1) and the rear side door latch (2) assembly from the vehicle.