Installation Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Pipe Shield

Courtesy of GENERAL MOTORS COMPANY

Install Fuel Pipe Shield (1)

Fig 2: Fuel Pipe Shield Fasteners And Retainers

Courtesy of GENERAL MOTORS COMPANY

Install Retainers (2) (Qty: 5)

CAUTION:

Refer to Fastener Caution .

Install and tighten Fuel Pipe Shield Bolts (1) (Qty: 2) to 9 N.m (80 lb in)

Fig 3: Fuel Pipe Shield Fastener

Courtesy of GENERAL MOTORS COMPANY

Install and tighten Fuel Pipe Shield Fastener (1) to 9 N.m (80 lb in)
Install Plenum Front Panel. Refer to Plenum Front Panel Replacement
Install Hood. Refer to Hood Replacement (ATS-V)